Table of Contents
Advertisement
8
Location
Kiaro! 200 User Guide
Safety Warnings and Precautions
Before using this printer, please read this section thoroughly. Warnings to heed and
important matters are described here to prevent damage to the user and other persons.
Do not attempt to operate this printer in any way other than those mentioned in the User
Guide.
Make sure there is sufficient space around the printer.
Warning
•
Never place items on the printer such as a flower vase, potted plant, cosmetics,
any liquid filled container, or metal fasteners. If such items were to fall on the
printer, this could cause a fire, electrical shock, or damage to the printer.
•
The electrical contacts inside the printer become extremely hot during normal
operation. To avoid causing a fire, never store flammable substances like alcohol,
thinner, etc. near the printer.
Caution
Avoid using the printer in the following types of locations.
•
Where the printer is exposed to open air or high humidity. This could cause a fire,
serious electrical shock, or damage to the printer. Also, if the printer is carried into
a warm room on a cold day, this could cause condensation inside the printer. If this
happens, allow the printer to sit for at least 1 hour at room temperature to adapt to
the ambient temperature and humidity.
•
Never place the printer on a slanted or unstable stand or table. If the printer is
dropped or slides off, this could cause personal injury. Also, never place a heavy
object on top of the printer. If the object is dropped or falls, this could cause injury.
•
Never expose the printer to open air or dust. This could cause a fire, serious
electrical shock, or damage to the printer. Also, never locate the printer near a
water faucet or in any other location where it will be exposed to water. This could
cause serious electrical shock.
•
Never set up the printer in a location that is exposed to high humidity or large
amounts of dust, or exposed to direct sunlight, high temperature, or open flame.
This could cause a fire or electrical shock.
•
Use the printer in an environment where temperature and humidity are within the
ranges of 59 to 86 degrees Fahrenheit (15 to 30 degrees Celsius) and 10 to 90%
RH (with no condensation).
•
To ensure normal operation of the printer and avoid possible damage, never install
the printer near large office equipment or any other type of electrical device that
emits a strong magnetic field.
127
Hide quick links:
Advertisement
Table of Contents
