Table of Contents
Advertisement
Turning on the Printer and Initial Ink Filling
Installing Media for the First Time
Kiaro! 50 User Guide
1
Press the power key.
When the printer is turned on, initial ink filling starts. It takes about 15 minutes to
finish the initial ink filling.
When the Status LED (green) is blinking, the printer is performing the initial ink
filling. Observe the following precautions during ink filling:
•
Do not turn off the printer.
•
Do not open/close the ink tank cover or the transport unit lever.
•
Do not operate other controls and components of the printer.
If the above precautions are not followed, initial ink filling may have to be performed
again. In such a case, turn off the printer and turn it on again. Initial ink filling will
start again.
1
Ensure the Power LED is lit. If the printer power is off, press the Power key to turn
it on.
2
Raise the transport unit lever.
Quick Start
9
Advertisement
Table of Contents
