Setting The Stop Position - QuickLabel Kiaro! 200 User Manual

Kiaro! 200 Maintenance Utility
60
4 Enter a horizontal baseline value.
In the following illustration, a label is exiting the printer. Note the positive and
negative adjustment directions.
5 To save the horizontal baseline value, choose

Setting the Stop Position

The Stop Position setting adjusts the position at which the media is fed after printing.
You can adjust the position -10 to +10 mm.
1 Launch the Kiaro! 200 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 200 > Kiaro! 200 Maintenance
open.
Select a display language and the Kiaro! 200 printer you want to connect to.
Choose OK.
2 Choose the Position
3 To read the stop position value from the printer and set the
accordingly, choose
4 Enter a stop position value.
• Positive values result in more media being fed after printing before the media
stops.
• Negative values result in less media being fed after printing before the media
stops.
5 To save the stop position value, choose
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Read From Printer.
Save to
Save to Printer.
Stop Position
Printer.
Kiaro! 200 User Guide
control