QuickLabel Kiaro! 200 User Manual page 24

Quick Start Guide
10
9 Turn the power switch on the supply mandrel to the on position.
10 Feed the media under the dancer arm and up into the entry slot on the rear of the
printer. The media path is illustrated below.
• If your printer model has a roll cover, the mandrel will unwind and feed media
as the dancer arm is lifted. Do not turn the supply mandrel by hand to advance
the media.
• If your printer model does not have a roll cover, ensure the mandrel is not
tightened at this time. The media roll should rotate freely on the mandrel during
this process.
Kiaro! 200 User Guide