Table of Contents
Advertisement
Kiaro! 50 Maintenance Utility
60
Setting the Vertical Baseline
The gap and reflective vertical baseline settings adjust the start of printing for gap or
reflective media. You can adjust the baseline -150 to +150 dots.
1
Launch the Kiaro! 50 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 50 > Kiaro! 50 Maintenance
open.
Select a display language and the Kiaro! 50 printer you want to connect to. Choose
OK.
2
Choose the
Print Settings
3
To read the vertical baseline values from the printer and set the
Reflective
controls accordingly, choose
4
Enter vertical baseline values for Gap and Reflective media.
In the following illustration, a label is exiting the printer. Note the positive and
negative adjustment directions.
5
To save the vertical baseline values, choose
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Read From
Save to
Gap
and
Printer.
Printer.
Kiaro! 50 User Guide
Advertisement
Table of Contents
