Table of Contents
Advertisement
Designing and Printing Labels
Installing Media
46
•
In the Kiaro! 50 printer driver printing preferences, choose
from the
Status
2
You can view estimates of remaining ink percentages in the Ink Levels area.
3
You can view an estimate of the maintenance cartridge level percentage in the
Maintenance Cartridge Level area.
Use this procedure to install media. These instructions will differ slightly based on
whether you are replacing an empty media roll, or replacing media with a different
media type or size.
Note: If you are replacing media with a wider media size, ensure the transport area
and media guide are not stained with ink. If the transport area or media guide are
stained with ink, clean the transport unit.
1
Ensure the Power LED is lit. If the printer power is off, press the Power key to turn
it on.
2
If printed labels are exiting the printer and have not been cut, use the manual cut
feature by pressing and holding the Pause key for at least two seconds.
tab.
Status Monitor
Kiaro! 50 User Guide
Advertisement
Table of Contents
