Priming The Printheads; Refreshing Kiaro! 50D Ink - QuickLabel Kiaro! 50 User Manual

Inkjet color label printer.
Table of Contents

Advertisement

Kiaro! 50 User Guide
2
Launch the Kiaro! 50 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 50 > Kiaro! 50 Maintenance
open.
Select a display language and the Kiaro! 50 printer you want to connect to. Choose
OK.
3
Choose the
Cleaning
4
Turn the printer power off and then back on to ensure the printer will not enter a
sleeping state during the shipping process. The printer entering sleep mode at any
point of the shipping process could result in a failure to complete the shipping
process correctly.
5
Choose Shipping. Follow the on-screen instructions to complete this procedure.
The ink will be drained from the printer. You will be prompted to install the orange
protectors and ink tank caps.
6
When the operation is complete, turn off the printer.
7
Pack the printer in its original packing material for shipping.

Priming the Printheads

Priming fills the printhead with ink when a heavy cleaning does not resolve a severe ink
non-discharge problem.
1
Launch the Kiaro! 50 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 50 > Kiaro! 50 Maintenance
open.
Select a display language and the Kiaro! 50 printer you want to connect to. Choose
OK.
2
Choose the
Cleaning
3
Choose Prime.

Refreshing Kiaro! 50D Ink

Due to pigment components, Kiaro! 50D ink requires periodic refreshing to maintain an
optimum mixture. The status monitor will prompt you to refresh ink as needed.
Note: This feature applies only to the Kiaro! 50D ink. If you are using the standard
Kiaro! 50, this procedure is not needed.
1
Launch the Kiaro! 50 Maintenance Utility.
From the Windows Start Menu, choose
Kiaro! 50 > Kiaro! 50 Maintenance
open.
Select a display language and the Kiaro! 50 printer you want to connect to. Choose
OK.
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
tab.
Start > All Programs > QuickLabel
Utility. A language and printer prompt will
Kiaro! 50 Maintenance Utility
63

Advertisement

Table of Contents
loading

Table of Contents