Operation Panel - QuickLabel Kiaro! 50 User Manual

Kiaro! 50 User Guide
# Part
4 Media Set Lever
5 Roll Holder
6 Media Guide

Operation Panel

[1]
[2]
[3]
[4]
[5]
# Part
1 Power Key/LED
2 Status LED
Description
Secure the media to the transport unit using this
lever.
Set media in the roll holder.
This guide presses on the media and prevents
the media from floating. Move it to fit the width of
the media.
Description
Press this key to turn on/off the printer. This LED
lights up or blinks depending on the power status.
• On - The printer power is on.
• Blinking - The printer is in sleep mode
(power-saving mode).
• Off - The printer power is off.
This LED lights up or blinks green or orange.
• Lit (Green) - The printer is online and printing
is possible.
• Blinking (Green) - The printer is processing or
operating (printing, cleaning, etc.).
• Lit (Orange) - An operator call error has
occurred.
• Blinking (Orange) - A service call error has
occurred.
• Off - The printer is offline and data cannot be
received.
Introduction
25