Table of Contents
Advertisement
Introduction
26
#
Part
3
Ink LEDs (Bk/C/M/Y)
4
Maintenance Cartridge
LED
5
Pause Key (and Manual
Cut)
Note: When the printer is in sleep mode, the Status LED, Ink LEDs, and Maintenance
Cartridge LED stay off regardless of the statuses of the printer, ink tanks, and
maintenance cartridge.
Description
Each LED lights up or blinks when the corre-
sponding ink tank is empty or low.
• Lit - The ink tank is empty or faulty.
• Blinking - The ink tank has a low ink level.
• Off - The ink tank has sufficient ink.
This LED lights up or blinks when the mainte-
nance cartridge is full or nearly full.
• Lit - The maintenance cartridge is full or faulty.
• Blinking - The maintenance cartridge is nearly
full.
• Off - The maintenance cartridge has sufficient
space for ink collection.
This key has two functions.
• Pause - Press this key to switch between
online and offline modes.
When printing is in progress, pressing this key
stops printing temporarily. Pressing this key
again resumes printing.
• Manual Cut - When automatic cutting is
disabled, pressing this key for at least two
seconds operates the manual cut.
Kiaro! 50 User Guide
Advertisement
Table of Contents
