6. Install the bottom access panel.
7. Mount the gateway on page 11.
8. Power up the gateway on page 10.
Installing the half-length WiFi/WLAN module
You will need a half-length WiFi module adapter provided with the WiFi option kit to install this option.
Procedure
1.
Power down the gateway on page 10.
2.
Dismount the gateway on page 12.
CAUTION:
DO NOT remove the top access panel under any circumstance. Removing the top access
panel can harm the heatsink or void the warranty to the equipment.
3.
Remove the bottom access panel on page 13.
4.
Remove the drive tray on page 14.
5.
Install the WiFi module adapter using the two holes of the half-length WiFi module.
24
Installing the half-length WiFi/WLAN module