Figure 14. Backplane I2C Connector; Figure 15. Front Control Panel And Front I/O Internal Cable Connections - Intel R1000WF System Integration And Service Manual

Intel ® Server System R1000WF Product Family System Integration and Service Guide
c) Route the backplane I2C cable next to the nearest chassis sidewall and connect the other end of the
cable to the white 1x4 pin connector (silk screened "HSBP I2C") on the server board
5. Connect the Front Panel Cables
As received, the chassis should have three cables pre-attached on one end of each cable to the system front
panel. The other end of each cable must be attached to matching connectors on the server board. The cables
should be routed to the server board in the following order: (1) Front Control Panel, (2) Front Panel Video,
and (3) Front Panel USB Ports.

Figure 15. Front Control Panel and Front I/O Internal Cable Connections

Figure 14. Backplane I2C Connector

9