Supermicro 2028UT-BC1NRT User Manual page 62

S S
UPER ERVER 2028UT-BTNRT/BC1NRT User's Manual
Manufacture Mode Select
Close pin 2 and pin 3 of jumper
JPME2 to bypass SPI flash security
and force the system to operate in
the Manufacture Mode, allowing the
user to flash the system firmware
from a host server for system setting
modifications. See the table on the
right for jumper settings.
Management Engine (ME)
Recovery
Use jumper JPME1 to select ME
Firmware Recovery mode, which will
limit resource allocation for essential
system operation only in order to
maintain normal power operation and
management. In the single operation
mode, online upgrade will be available
via Recovery mode. See the table on
the right for jumper settings.
ME Mode Select
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
ME Recovery
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
5-18
Definition
Normal (Default)
Manufacture Mode
Definition
Normal (Default)
ME Recovery