Installing Memory - Supermicro 2028UT-BC1NRT User Manual

S S
UPER ERVER 2028UT-BTNRT/BC1NRT User's Manual
5-5

Installing Memory

Note: Check the Supermicro web site for recommended memory modules.
Exercise extreme care when installing or removing DIMM modules
Installing DIMMs
1. Insert the desired number of DIMMs into the memory slots, starting with slot
DIMMA1.
2. Push the release tabs outwards on both ends of the DIMM slot to unlock it.
3. Align the key on the DIMM module with the receptive point on the slot.
4. Use two thumbs together to press on both ends of the module straight down
into the slot until the module snaps into place.
5. Press the release tabs to the lock positions to secure the DIMM module into
the slot. See Figure 5-3.
To Install:
Insert module vertically
and press down until it
snaps into place. Pay at-
tention to the alignment
notch at the bottom.
To Remove:
Use your thumbs to
gently push the release
tabs near both ends of
the module. This should
release it from the slot.
CAUTION
to prevent any possible damage.
Notch
Release Tab
Top View of Memory Slot
Figure 5-3. Installing DIMM into Slot
5-8
Front View
Note: Notch should
a l i g n w i t h t h e
receptive key on
the slot.
Notch
Release Tab