Supermicro 2028UT-BC1NRT User Manual page 104

SUPERSERVER 2028UT-BTNRT/BC1NRT User's Manual
Link Failure Threshold
Use this feature to set the link failure threshold. When the number reaches
beyond the threshold, the system will automatically take corrective actions. The
default setting is 7.
Refresh Options
Use this feature to set self-refresh mode The options are Acc Self Refresh
and 2x Refresh.
HA (Hash Mode) Early Write Post Mode
Select Enable to support memory hash-method-comparison mode when the
system is running at the early stage of POST (Power-On-Self-Test). The options
are is Enable and Disable.
MC Channel Hash Mode
Select Enabled to support the hash-method-comparison mode for the memory
controller to improve memory performance. The options are Enabled and
Disabled.
Unused Memory Channel Input
Select Enabled to allow input from unused memory channels. The options are
Enabled and Disabled.
Command 2 Data Tuning
Select Enabled to fine-tune electrical command paths from the host system to
the memory-extension buffer (MXB). The options are Enabled and Disabled.
JordonCreek Power Management
Select Enabled to activate power management features embedded in the Jordon
Creek chip for the Intel Scalable Memory Interconnect 2 (Intel SMI 2) controller.
The options are Enabled and Disabled.
MRC Debug Level
Use this feature to set the debugging level for memory reference codes, which
are used for memory multiple threads initialization. The options are L0, L1 and L2.
Halt on Memory Fatal Error
Select Enabled to put the system on hold when a memory fatal error occurs.
The options are Enabled and Disabled.
7-26