Supermicro 2028UT-BC1NRT User Manual page 127

Chapter 7: AMI BIOS
Configuration Address Source (Available when the item above is set to Yes)
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the field. If DHCP is selected, the BIOS will search for a
DHCP (Dynamic Host Configuration Protocol) server in the network that is attached
to and request the next available IP address for this computer. The options are
DHCP, Unspecified, and Static.
The following items are assigned IP addresses automatically if DHCP is selected,
or can be configured manually if Static is selected.
Station IP Address (Available when the item above is set to Yes)
This item displays the Station IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
Subnet Mask (Available when the item above is set to Yes)
This item displays the sub-network that this computer belongs to. The value of each
three-digit number separated by dots should not exceed 255.
Station MAC Address (Available when the item above is set to Yes)
This item displays the Station MAC address for this computer. Mac addresses are
6 two-digit hexadecimal numbers.
Router IP Address (Available when the item above is set to Yes)
This item displays the Router IP address for this computer. This should be in decimal
and in dotted quad form (i.e., 192.168.10.253).
7-49