Lucent Technologies MLS-model Programming And Use Manual page 364

Feature Reference
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To change the Star Code Dial Delay setting:
1. Press
10 or 11.
The current setting is displayed.
2. Press the number on the dialpad for the setting you want (see "Valid
Entries," above), or press
displayed.
3. To return to the default setting, press
4. Select another procedure or exit programming mode.
5-254
e
and on system phones.)
f 0 0 s s # 4 1 0
D d
or until the correct setting is
r
.
at extension