Lucent Technologies MLS-model Programming And Use Manual page 308

Feature Reference
Valid Entries
1 = Assigned to next available button at extension 10
2 = Not Assigned
3 = Select Button (then press a programmable button to assign Night Service to
that button)
Programming
(See Figure 2-3 on page 2-22 for the location of special programming buttons such
s
as
To program a Night Service Button at extension 10:
1. Press
10.
2. At this point:
3. Select another procedure or exit programming mode.
4. Label the Night Service button at extension 10.
Using
To turn Night Service on:
1. Press the Night Service button at extension 10.
5-198
e
and on system phones.)
f 0 0 s s # 5 0 3
If you want to assign Night Service to the first available button, press
D
until a display similar to the following appears:
Night Service Button
1 Assigned - Ext10
If you want to remove the Night Service button assignment, press
D
until a display similar to the following appears:
Night Service Button
2 Not Assigned
If you want to assign Night Service to a specific button, press
display similar to the following appears:
Night Service Button
3 Select a Button
Then press a programmable button with lights to assign Night
Service to that button.
If a System Password is programmed, the green light next to the
button flashes; you must continue with Step 2.
If no System Password is programmed, the green light is on steady
and Night Service is on.
at extension
3
. A