Table of Contents
Advertisement
Saia-Burgess Controls AG
Network
The network settings for the panel are configured here. Depending on the network, the connection
works without setting a gateway or DNS server. You can exit the menu using the Setup button.
With the programmable panels, the network configuration is generally carried out via the PG5 Device
Configurator. If the device configuration is updated via PG5, the data set via the Setup will be over-
written. If these data are to be carried over in the PG5, the configuration must be carried over by up-
loading the configuration data to the PG5 project.
5.1.1
DCHP on
If DCHP is off, an IP must be set by the user. Otherwise, all necessary settings will be obtained from
the DCHP server.
5.1.2
TCP/IP address
IP address of the panel
5.1.3
Subnet mask
Subnet mask of the network in which the panel is located
5.1.4
Default gateway
IP of the default gateway
5.1.5
DNS on
Enables access via DNS
5.1.6
Primary DNS server
IP of the primary DNS server
5.1.7
Secondary DNS server
IP of the secondary DNS server
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
24
Advertisement
Table of Contents
