Table of Contents
Advertisement
Saia-Burgess Controls AG
1.6.3
USB port as service port
With the PCD7.D443WT5Rx panels, the USB port is used to load the user program with PG5 onto
the controller.
With the PCD7.D443WTPRx panels, this port generally serves as a service port. It is mainly used to
load new firmware programs onto the device.
The USB port meets the USB 1.1 specification. Maximum speed: 12 MBit/s.
1.6.4
Introduction to the Web Editor on the Micro Browser Panel PCD7.D4xx
You can download detailed documentation from our website.
See Manual 26-838_Manual_Web-Editor.
1) When setting up the project, you must select the resolution WQVGA.
This corresponds to 480 x 272 pixels.
2) You must define the entry panel (SIP) depending on whether the panel is installed vertically or
horizontally. See Chapter 5.6.2 Keyboard
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
15
Advertisement
Table of Contents
