SBC D443WTPR Manual page 45

Saia-Burgess Controls AG
Read/ Internal INT variables
write (Container)
R uBT_PressX
R uBT_PressY
R/W uBT_SbusAddr
R/W uBT_ ScaleMode
Only uBT_SerialNumber
reada-
ble
No uBT_Setup
R/W uBT_SubNetMask
Only uBT_Version
reada-
ble
R/W uBT_RtcDate
R/W uBT_RtcTime
*: IPv4 private addresses are generally used. Default settings are:
- 1 x A class with subnet mask 10.x.x.x and mask 255.0.0.0 – parts can also be used
- 16 x B class with subnet mask 172.16.x.x to 172.31.x.x and mask 255.255.0.0 – parts or
combinations can also be used - or 256 x C class with subnet mask 192.168.0.x to 192.168.255.x and mask
255.255.255.0 - combinations can also
be used
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
Type Standard Min.
value
Min.
length
Decimal 0
value string
Decimal 0
value string
Decimal 10 0
value string
Decimal. Auto (0) 0
List
string
Hex. or dec. 0
Text - -
String IP 0xFF FF *
address FF 00
ANSI text Current 0
string version
string
ANSI text
string
ANSI text
string
Max. Description
value
Max.
length
Gesture recognition; press recognition on
touchscreen X coordinate
Contains the X coordinate if the press
gesture recognition was activated
Gesture recognition; press recognition on
touchscreen Y coordinate
Contains the Y coordinate if the press
gesture recognition was activated
253 Own SBus address
2 Setting for scale mode
Auto (0): Smaller views are automatically
adapted view for view to the terminal
screen size. QVGA views are enlarged to
the full screen size of VGA terminals (2x
horizontal and vertical enlargement with
pixel doubling).
VGA (1): Forced position for VGA without
scaling of smaller views. Scaling on VGA
terminals is thus disabled. QVGA (2):
Forces scaling with pixel doubling on
VGA terminals.
The setting takes effect when the view
changes, with the next URL jump or fol-
lowing a restart.
...8 Serial number (only readable)
- Entry of "show" (case sensitive). A pop-
up window with the Setup Menu will be
opened in the terminal.
* Read/write subnet mask of the subnet
used by the terminal. *
If changed, a restart is necessary
FTP connections will be lost.
32 Firmware version
String only readable
The date is obtained from the real time
clock on the MB Panel. (Real time clock
RTC must be enabled in the Setup Menu)
The time is obtained from the real time
clock on the MB Panel. (Real time clock
RTC must be enabled in the Setup Menu)
45