SBC D443WTPR Manual page 42

Room web panel pcd7.d443wtxrx series
Table of Contents

Advertisement

Saia-Burgess Controls AG
Read/
Internal INT variables
write
(Container)
R/W
uBT_BackLightTimeout
Only
uBT_BooterVersion
reada-
ble
Only
uBT_ConfigType
reada-
ble
R/W
uBT_DefaultGateway
No
uBT_DispResolution
Yes
uBT_DisplayRotation
R
uBT_Drag
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
Type
Standard
Min.
value
Min.
length
Decimal
15
0
value string
ANSI text
Current
0
string
version
string
ANSI text
Current
0
string
config.
type
String IP
0x00 00
*
address
00 00
ANSI text
<Screen
0
string
width>
<Screen
height>
<Colour
depth>
UTF8
1) !!!
Text
(0x30
string
C2
B0)
Decimal
0
0
value string
Max.
Description
value
Max.
length
5000
Time (min) until the background lighting is
switched off. When the screen is touched
or when switching on via containers, the
background lighting is switched on and
the countdown begins.
If value = 0: No time-delayed monitoring
of the background lighting. In this case,
the background lighting will remain
switched on all the time.
8
Firmware booter version
String only readable
24
Configuration type
String only readable
*
Read/write IP address of the gateway in
the subnet used (forced position, over-
writes default). * Set to 0: Forced position
disabled.
If setting = 0: Depending on the router
used, external addresses that lie outside
the subnet cannot be reached. If the set-
ting is changed, a restart is necessary.
FTP connections will be lost in the pro-
cess.
16
Information regarding resolution
String only readable
270°
Rotation 0°, 90°, 180°, 270°
If changed, a restart is necessary.
FTP connections will be lost in the pro-
cess.
Direct displaying of UTF8 may not
!!!! 1)
be supported by the FTP client.
The display is rotated "as it is". The
screen may not be displayed in full even
with automatic scaling.
If the upscaling function is enabled, the
scaling of the non-rotated screen will be
retained during rotation. The calibration of
the rotated screen corresponds to that of
the non-rotated screen. In order to
change the calibration, please return to
the non-rotated screen.
2
Gesture recognition; final speed when
swiping
0: No result
1: Speed at the end of swiping was slow
2: Speed at the end of swiping was fast
(throw)
42

Advertisement

Table of Contents
loading

Table of Contents