SBC D443WTPR Manual page 11

Saia-Burgess Controls AG
Lower it into the adapter and ..
The panel will now lock in the adapter.
Remark:
The mounting and removing of the panel described below refers to panels with hardware version B
or later.
For the panels with hardware version A, the locking ratchet was on the upper right side of the
housing.
Dismounting also took place by pressing on the locking ratchet with a screwdriver and pulling
forward the display from the adapter.
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
then push it down.
11