Table of Contents
Advertisement
Saia-Burgess Controls AG
3) With the button still pressed, switch on the MB Panel and keep the reset button pressed for a
further 90 sec.
4) The firmware will recreate the file systems. In the process, the panel may not react for 1 to 2
minutes. Please do not switch off the panel during this time. Once the process is complete, the
MB Panel will automatically restart and you will be prompted to recalibrate the touchscreen. The
system is now fully restored.
5) In the event that the panel was switched off while the formatting or setup process was running,
repeat the procedure under Point 1.
Background lighting
The duration of the background lighting can be set manually. This function helps to save energy. If
background lighting is disabled, you can save approx. 3/4 watt – a significant amount. This also
helps to extend the
Operating life of the background lighting
The normal operating life of the background lighting (at 25°C) is defined at approx. 50 kh. This cor-
responds to being switched on permanently for 5 years. However, this value
or less) if the operating temperature is 10°C or lower. You must bear this mind and set the value for
the duration of the background lighting accordingly.
Font types supported by the PCD7.D443WTxRx MB Panel
The panel supports the use of TTF "TrueType Fonts"
Calculating the required space for:
Simple text field, multi-line text field, editing field for text field and button with text.
Definitions:
Font size: Character size (font size in pixels)
Y size: Size of the graphic symbol (in pixels)
X size: Width of a character
Text length: Length of a single-line text.
Text field: Length of the painter
General recommendations for text fields (information can be found in the online help for the first
Web Editor version)
PCD7.D443WTxRx | Document 27-644 | Version ENG04 | 2017-10-30
operating life
of the background lighting.
quickly drops
(to half
34
Advertisement
Table of Contents
