Icon Conventions - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual

Applicant: Motorola Solutions
38 | About MTS LiTE, MTS 2 and MTS 4 Installation, Configuration and Basic Service Manual
Document Title
Ethernet Site Links
Link Encryption
MTS Man Machine Interface (MMI)
Commands
TESS Software User Guide
Backup and Restore Including
FRU/FRE volumeMTS Lite, MTS 2, and
MTS 4 Restoration

Icon Conventions

The documentation set is designed to give the reader more visual clues. The following graphic icons are used
throughout the documentation set. These icons and their associated meanings are described below.
Danger: The signal word DANGER with the associated safety icon indicates information that, if
disregarded, will result in death or serious injury.
Warning: The signal word WARNING with the associated safety icon indicates information that, if
disregarded, could result in death or serious injury, or serious product damage.
Caution: The signal word CAUTION with the associated safety icon indicates information that, if
disregarded, may result in minor or moderate injury, or serious product damage.
Caution: The signal word CAUTION may be used without the safety icon to state potential damage or
injury that is not related to the product.
Important: IMPORTANT statements contain information that is crucial to the discussion at hand, but is
not CAUTION or WARNING. There is no warning level associated with the IMPORTANT statement.
Note: NOTE contains information more important than the surrounding text, such as exceptions or
preconditions. They also refer the reader elsewhere for additional information, remind the reader how to
complete an action (when it is not part of the current procedure, for instance), or tell the reader where
something is located on the screen. There is no warning level associated with a note.
Suggestion: SUGGESTION indicates a recommendation or tip from Motorola that does not require to be
followed, but might be helpful. There is no warning level associated with SUGGESTION.
Send Feedback | September 2014 | 6802800U74-AD
Description
tions. It also describes the role of the numerous network manage-
ment software applications used for managing the system
This manual contains information on the Ethernet Site Links
(ESL) feature, which provides a means to establish Ethernet con-
nections of the following type:
• Base station links (single and redundant)
• Inter-zone links
• Remote control site links terminated at non-redundant control
site routers
This manual describes the technical solution for setting up En-
cryption and Authentication, which is an extension to the Ether-
net Site Links (ESL) feature, on Routers and Base Stations.
This manual describes the Man-Machine Interface commands
used to test and configure MTS sites.
This manual is an introduction and guide to the use of the Dime-
tra BTS (Base Transceiver System) Service Software. Through
the Dimetra BTS Service Software trained service personnel and
systems engineers can configure and program a BTS.
This volume contains the system backup and restoration proce-
dures and their impact on the services as well as pre and post-re-
storation checks. The volume also describes how to perform
FRU/FRE procedures.
Equipment Type: ABZ89FC5827 / 109AB-5827
Exhibit D2