Introduction; Package Contents; Document Conventions - Motorola RFS6000 Series Installation Manual

1

Introduction

The Motorola RFS6000 Series RF Switch is a high-performance member of Motorola's Wireless
Switch family. The RFS6000 Series RF Switch provides centralized Wireless LAN (WLAN)
configuration and management by coalescing a network "intelligence" previously spread across
physically distributed access points. By replacing access points with simpler access ports (or "thin"
access points), the RFS6000 Series RF Switch becomes a WLAN's single point of contact, thus
reducing wireless networking complexity by moving management out of the ceiling and into the
wiring closet. In addition, through the use of patented Virtual AP architecture, the RFS6000 Series
RF Switch lets you create multiple WLANs without changing or adding to the existing wired network
infrastructure.
This document is written for the network device installer.

1.1 Package Contents

Inspect the package contents and report any missing or damaged items to your sales representative.
The package should contain the following:
• RFS6010 RF Switch with Rack Brackets installed
• Console Cable
• Installation Guide (this document)
• China RoHS compliance document

1.2 Document Conventions

The following graphical alerts are used in this document to indicate notable situations:
NOTE
CAUTION
WARNING!
Tips, hints, or special requirements that you should take note of.
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
Indicates a condition or procedure that could result in personal injury or
equipment damage.
1
Introduction