Applicant: Motorola Solutions
278 | Site Controller
12 Secure the Site Controller in the chassis with the captive screws.
13 Except the power cables, reconnect all other cabling to the unit as tagged during the removal.
14 Power up the Site Controller:
a Reconnect the power cables to the MTS Power Supply Units.
b Set the power switch to the ON position.
15 Perform
Resetting the RTC Battery Status on page
Send Feedback
| September 2014 | 6802800U74-AD
Important: Connect the ribbon cables at the rear before sliding the unit into the chassis.
Equipment Type: ABZ89FC5827 / 109AB-5827
275.
Exhibit D2