Resetting The Router To Factory Defaults - Arris Touchstone TG3452 User Manual

1. Reset button
2. Tel (1 and 2)
3. USB
4. Ethernet (1 - 4)

Resetting the Router to Factory Defaults

To reset the router to factory defaults, press and hold the Reset button on the back of the
Telephony Gateway for more than fifteen seconds. This restores the wireless setup
configuration and router configuration parameters to the factory defaults. You may need to
do this if a misconfiguration has locked out all access.
Release 34 DRAFT 1.6 June 2017
© 2017 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 6: Using the Telephony Gateway
5. MoCA LED
6. Cable
7. Power
Touchstone TG3452 Telephony Gateway User Guide
36