Setting Parental Controls; Finding The Mac Address Of A Computer - Arris Touchstone TG3452 User Manual

2. If you cannot access the wireless LAN, you must first establish a wired Ethernet
connection between your computer and the TG3452.
3. In your web browser, open the page http://192.168.0.1/ to access the wireless router
setup.
The Login screen displays.
Note: The default user name is "admin". The default password is "password", in lower
case letters.
4. Enter the user name and password and click the Apply button to log in.
The System Basic Setup screen displays.
5. Use the online help information to set configuration parameters as required.
Note: Most configuration parameters that you may want to set can be accessed on the
System Basic Setup screen, including the security mode and setting a system password.

Setting Parental Controls

The Parental Control feature allows you to block specified keywords and web sites from
being accessed and also to specify trusted computers in the network. Trusted computers are
not affected by the parental control settings.

Finding the MAC Address of a Computer

In order to set up trusted computers you must first determine the MAC address of those
computers.
Use the operating system of your computer to find its MAC address, as follows:
Windows: from the Start menu, find and select the
Sharing Center. Then double-click either "Wireless Network Connection" for a wireless
connection, or "Local Area Connection" for an Ethernet connection. Next click the
button. The "Physical Address" line shows the MAC address.
macOS: open System Preferences and click the Network icon. To find the Ethernet MAC
address, select
"Ethernet ID" field shows the MAC address. To find the wireless MAC address, select
from the Show drop-down, then click the Airport tab. The "Airport ID" field shows the MAC
address.
Linux: open a shell window and type
interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0).
Release 34 DRAFT 1.6 June 2017
© 2017 ARRIS Enterprises LLC. All Rights Reserved.
Chapter 4: Installing and Connecting your Telephony Gateway
Built-in Ethernet from the Show drop-down, then click the Ethernet tab. The
/sbin/ifconfig
Control Panel. Double-click
(and press Enter). The wireless
Touchstone TG3452 Telephony Gateway User Guide
Network &
Details
Airport
25