Polycom SpectraLink 1725-36031-001 Administration Manual page 35

PN: 1725-36031-001_H.doc
When forwarding packets, the SVP Server shall always overwrite the
received DSCP value. The final DSCP tag for packets in each of the
traffic classes are assigned a DSCP value based on the following rules.
(Please see table below.)
• If both
Administration
value as shown in the table below will be used.
Default
• If is set at any number (
Administration
that setting (
Value X
.
Class
•
If any of the
Traffic Class
other than , that setting (Value Y) will override the
Default
setting.
Administration
Traffic Class
Default
WT (In call)
Priority High
Value Y
Default
WT (Standby)
Priority Med
Value Y
Default
RTP
Priority High
Value Y
Default
PBX
Priority Med
Value Y
Default
Inter-SVP2
Priority Med
Value Y
Default
Administration
Priority Low
Value Y
Default DSCP settings will mark traffic for Best Effort handling
under normal circumstances. Please consider changing these
values based on the recommended QoS settings from your network
hardware manufacturer to prioritize your voice traffic.
Configuring the SpectraLink 8000 SVP Server
and the setting is
Traffic Class
Value X
) it will override the
Default
settings are set at any value (Value Y)
Administration
Default Value X
4
Y
0
Y
4
Y
0
Y
0
Y
0
Y
, the
Default
) other than ,
Default
value of the
Traffic
X
Y
X
Y
X
Y
X
Y
X
Y
X
Y
35