The Netlink Svp-Ii System Menu - Polycom SpectraLink 1725-36031-001 Administration Manual

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco

The NetLink SVP-II System Menu

24
Connecting via telnet
Telnet can only be used after the SVP Server's IP address is
configured.
The telnet method of connection is used for routine maintenance of
the SpectraLink Server for both local and remote administration,
depending on your network.
To connect via telnet, run a telnet session to the IP address of the SVP
Server. Once you connect and log in, the
displays.
The main menu displays as shown here:
System Status
Menu for viewing error messages, status of operation and software
code version.
menu
NetLink SVP-II System
PN: 1725-36031-001_H.doc