Svp-Ii Mode - Polycom SpectraLink 1725-36031-001 Administration Manual

SpectraLink 8000 SVP Server: Administration Guide for Mitel and Cisco

SVP-II Mode

30
Defaults to for an IP environment. Press Enter to select and
NetLink IP
the screen is immediately redrawn with additional options for the IP
environment.
The following options must be configured:
Phones per Access Point
AP specifications are detailed in the Configuration Notes for each brand
and type. Refer to these notes when entering the number of
simultaneous calls supported for your type.
802.11 Rate
Select 1MB/2MB to limit the transmission rate between the wireless
telephones and APs. Select
to determine its rate (up to 11 Mb/s).
to allow the wireless telephone
Automatic
PN: 1725-36031-001_H.doc