Required Information - Polycom DOC2564A Installation & Configuration Manual

Field
Register Host
Names
Automatically to
DNS Server
Local Domain
Name
Primary DNS
Server IP Address
6
Click the Next button.
7
In the Fast Configuration Wizard - Environment dialog box, select the
IP Network Type: H.323, SIP or H.323 & SIP.
8
Click Next.
9
If you selected SIP go to Step 13.
10 In the Fast Configuration Wizard - Gatekeeper dialog box, enter the

required information:

Field
Gatekeeper
Primary Gatekeeper
IP Address or
Name
MCU Prefix in
Gatekeeper
8
Description
Select this option to automatically register the
MCU Signaling Host and Shelf Management with
the DNS server.
Enter the name of the domain where the MCU is
installed.
The static IP addresses of the primary DNS server.
Description
Select Specify to enable configuration of the
gatekeeper IP address.
When Off is selected, all gatekeeper options are
disabled.
Enter either the gatekeeper's host name (if a DNS
Server is used) or IP address.
Enter the string with which the MCU registers itself
with the gatekeeper.
The gatekeeper uses this string to identify the MCU
when forwarding calls to it.
H.323 endpoints use this number as the first part of
their dial-in string when dialing the MCU.