HP FlexFabric 5930 Series Command Reference Manual page 51

b-mac mac-address b-vlan vlan-id: Specifies a B-MAC in a B-VLAN. If you do not specify this option, the
command displays all unicast FIB entries.
verbose: Displays detailed information about unicast FIB entries. If you do not specify this keyword, the
command only displays brief information.
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify an IRF member
device, the command displays unicast FIB entries for all IRF member devices.
Usage guidelines
The SPBM unicast FIB is used in the data plane for forwarding unicast traffic. It contains unicast entries
derived from the SPBM unicast FDB.
Examples
# Display brief information about all SPBM unicast FIB entries.
<Sysname> display spbm unicast-fib
Flags: E-Egress T-Transit
B-MAC
0011-2200-0101 1
0011-2200-0101 2
# Display detailed information about all SPBM unicast FIB entries.
<Sysname> display spbm unicast-fib verbose
Flags: E-Egress T-Transit
B-MAC
0011-2200-0101 1
0011-2200-0101 2
# Display detailed information about the unicast FIB entry for B-MAC 0011-2200-0101 in B-VLAN 1.
<Sysname> display spbm unicast-fib b-mac 0011-2200-0101 b-vlan 1 verbose
B-MAC : 0011-2200-0101
Port : FGE1/0/2
Flags : T
Epoch : 0x1
Context: 0xffffffff 0xffffffff 0xffffffff 0xffffffff
Command output
1.
Field
Port
Flags
Driver flag
Epoch
B-VLAN Flags Port
T FGE1/0/1
T FGE1/0/2
B-VLAN Flags Driver flag Epoch
T Done
T Done
B-VLAN
Driver flag: Done
Description
Outgoing interface.
Forwarding actions:
•
E—Forwards the frame out of the tunnel to the customer site.
•
T—Forwards the frame to the next node in the tunnel.
If this field displays both flags, the device performs both actions.
State of issuing the entry to the driver:
•
Nores—SPBM failed to issue the entry to the driver because of resources
insufficiency. The entry is not usable.
•
Done—SPBM issued the entry to the driver.
Entry aging counter.
Port
0x1 FGE1/0/2
0x1 FGE1/0/2
: 1
47