Service-Instance; Set-Overload - HP FlexFabric 5930 Series Command Reference Manual

Hide thumbs Also See for FlexFabric 5930 Series:
Table of Contents

Advertisement

Examples
# Clear SPBM unicast FIB statistics.
<Sysname> reset spbm unicast-fib statistics slot 1

service-instance

Use service-instance to create a service instance on a Layer 2 Ethernet interface or enter service instance
view.
Use undo service-instance to delete a service instance.
Syntax
service-instance instance-id
undo service-instance instance-id
Default
No service instances are created on a Layer 2 Ethernet interface.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
instance-id: Specifies a service instance ID, in the range of 1 to 4096.
Examples
# Create service instance 1 on FortyGigE 1/0/1 or enter service instance view.
<Sysname> system-view
[Sysname] interface fortygige 1/0/1
[Sysname-FortyGigE1/0/1] service-instance 1
[Sysname-FortyGigE1/0/1-srv1]

set-overload

Use set-overload to enable ISIS-SPB to set the LSDB overload bit in LSPs.
Use undo set-overload to restore the default.
Syntax
set-overload [ on-startup [ [ start-from-nbr system-id [ timeout1 [ nbr-timeout ] ] ] | timeout2 ]
undo set-overload
Default
The LSDB overload bit is not set.
Views
SPBM view
Predefined user roles
network-admin
63

Advertisement

Table of Contents
loading

Table of Contents