Display Spbm Ect - HP FlexFabric 5930 Series Command Reference Manual

Field
EpochNumber
GetBMACNumber
GetBMACFail
SetIfNumber
AgeIfNumber
SetIfErrNumber

display spbm ect

Use display spbm ect to display B-VLAN to ECT algorithm mappings by ECT algorithm index.
Syntax
display spbm ect [ ect-index ] [ standby slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ect-index: Specifies an ECT algorithm index in the range of 1 to 16. If you do not specify an ECT
algorithm, the command displays information for all ECT algorithms.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a
subordinate device, the command displays information for the master device.
Examples
# Display information about all ECT algorithms.
<Sysname> display spbm ect
ECT-1:
Algorithm: 00-80-c2-01
Active B-VLANs: 1-10
Inactive B-VLANs: 31-4094
ECT-2:
Algorithm: 00-80-c2-02
Active B-VLANs: 11-20
Inactive B-VLANs: 21-30
ECT-3:
Algorithm: 00-80-c2-03
Active B-VLANs: N/A
Inactive B-VLANs: N/A
ECT-4:
Algorithm: 00-80-c2-04
Active B-VLANs: N/A
Description
Number of global SPBM process reinitiations. If the timestamp of an entry
is smaller than this value, the entry is deleted.
Number of attempts to get B-MAC addresses from the driver.
Number of failures to get B-MAC addresses from the driver.
Number of SPBM enabling attempts on the interface.
Number of age-outs on the interface.
Number of failures to set interfaces in the driver.
Mask: 0x00
Mask: 0xff
Mask: 0x88
Mask: 0x77
18