Bridge-Priority; Circuit-Cost - HP FlexFabric 5930 Series Command Reference Manual

Related commands

circuit-cost

•
spbm cost
•

bridge-priority

Use bridge-priority to configure the SPBM bridge priority.
Use undo bridge-priority to restore the default.
Syntax
bridge-priority priority
undo bridge-priority
Default
The SPBM bridge priority is 32768.
Views
SPBM view
Predefined user roles
network-admin
Parameters
priority: Specifies a bridge priority. It must be a multiple of 4096 in the range of 0 to 61440. For
example, the bridge priority can be 0, 4096, or 8192. A lower value represents higher priority.
Usage guidelines
In conjunction with the system ID, the SPBM bridge priority forms the SPBM bridge ID. The SPBM bridge
ID is a tie-breaker used in the ECT algorithms for choosing shortest paths.
Examples
# Set the bridge priority to 4096.
<Sysname> system-view
[Sysname] spbm
[Sysname-spbm] bridge-priority 4096
circuit-cost
Use circuit-cost to configure a global SPBM link metric value.
Use undo circuit-cost to restore the default.
Syntax
circuit-cost value
undo circuit-cost
Default
No global SPBM link metric value is configured.
Views
SPBM view
5