HP FlexFabric 5930 Series Command Reference Manual page 16

Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
ect ect-number: Specifies an ECT algorithm index in the range of 1 to 16.
standby slot slot-number: Specifies a subordinate device by its IRF member ID. If you do not specify a
subordinate device, the command displays information for the master device.
Examples
# Display AP information for ECT algorithm 1 on FortyGigE 1/0/1.
<Sysname> display spbm agreement-protocol status interface fortygige 1/0/1 ect 1
Port AP information:
TxDigest : 00000000000000000000000000003f1f5e5270ce
RxDigest : 00000000000000000000000000003f1f5e5270ce
NBRAPMode: Both
TxAN : 1
RxAN : 0
TxValid : No
MisOrder : No
CalcEnd : Yes
Port SPT AP information:
SystemID : 0011.2200.0001
Role : ROOT
PSTState : 2
Agree : Yes
Sync : No
Forward : Yes
Port SPT AP information:
SystemID : 0011.2200.0101
Role : DESI
PSTState : 2
Agree : Yes
Sync : No
Forward : Yes
Command output
1.
Field
TxDigest
RxDigest
NBRAPMode
TxDAN : 0
RxDAN : 0
RxValid : No
TopoAgree: Yes
AgreeSend: Normal
SelectedRole: ROOT
ReRoot : No
Agreed : Yes
Synced : Yes
Forwarding : Yes
SelectedRole: DESI
ReRoot : No
Agreed : Yes
Synced : Yes
Forwarding : Yes
Description
Local agreement digest.
Agreement digest of the neighbor.
AP mode of the neighbor:
•
Both—Performs AP check for both unicast and multicast FDB entries.
•
Multicast—Performs AP check only for multicast FDB entries.
•
Off—AP mode is disabled.
12