Spbm; Spbm Authentication Send-Only - HP FlexFabric 5930 Series Command Reference Manual

<Sysname> system-view
[Sysname] vsi vpn1
[Sysname-vsi-vpn1] spb i-sid 256
[Sysname-vsi-vpn1-256]

spbm

Use spbm to enable SPBM globally and enter SPBM view.
Use undo spbm to restore the default.
Syntax
spbm
undo spbm
Default
SPBM is disabled globally.
Views
System view
Predefined user roles
network-admin
Usage guidelines
You must enable SPBM both globally and on the provider network ports on all BEBs and BCBs in the
SPBM network.
You must enable SPBM globally before you can configure any other SPBM settings.
When you disable SPBM, all SPBM-related settings are removed automatically.
Examples
# Enable SPBM globally.
<Sysname> system-view
[Sysname] spbm
[Sysname-spbm]
Related commands
spbm enable

spbm authentication send-only

Use spbm authentication send-only to disable authentication for incoming ISIS-SPB hello packets on an
interface.
Use undo spbm authentication send-only to restore the default.
Syntax
spbm authentication send-only
undo spbm authentication send-only
66