Safety Requirements - Polycom DOC2232A Getting Started Manual

MGC-25 Getting Started Guide

Safety Requirements

1-2
For your protection, please read these safety instructions completely before
operating the equipment.
Look carefully for potential hazards in your work area: moist floors,
•
ungrounded power cables, frayed power cords, missing safety grounds
and so forth.
Locate the main circuit breaker within the room.
•
• Locate the emergency power OFF switch within the room.
Never assume that power is disconnected from a circuit.
•
• Only use the power cord supplied with the system.
The power cord should only be connected to a power outlet that has a
•
protective ground contact.
Ensure that the power cord is easily accessible from the back of the
•
system at all times.
When moving the system, the LCD Display door must always be closed.
•
Place the equipment in a well-ventilated area where the vents are free
•
from obstruction.
Do not place heavy objects directly on top of the MGC-25.
•
• Do not use liquids around your equipment.
Never open or disassemble this equipment.
•