Table of Contents
Advertisement
Defining an MCU
Initial IP
Configuration
Installing the
MGC Manager
Starting the MGC
Manager
Defining an MCU
Connecting
to an MCU
Configuring the
Network Services
To define a new MCU:
1.
In the Browser pane, right-click the MCU Network icon, and then click
New MCU.
The Add MCU dialog box opens.
2.
In the Name box, enter the name of the MCU, using up to 20 characters
(no comma, period or semicolon). Specify a name that clearly identifies
the MCU.
3.
In the IP Address box, enter the IP Address of the MCU.
The IP address should be identical to the one configured in the LCD
Display during the Initial IP Configuration settings.
4.
Click OK.
The Add MCU dialog box closes. A new icon with the specified MCU
name appears in the Browser pane listed below the MCUs Network icon.
Chapter 3 - Initial System Setup
3-7
Advertisement
Table of Contents
