Botex DMX DC-192 User Manual page 44

Operating
Automatic playback
8.4.5 Audio playback
DMX DC-192
44
DMX controller
1. Press [Auto/Del]. The indicator for automatic playback in the display lights up.
2. Press the [CHASE] buttons of the chases you want to play. The corresponding LED lights
up and playback starts. You can choose more than one chase at a time to create a chase
sequence.
3.
Using the faders [SPEED] and [FADE] you can adjust the chase playback. You can also
press [Tap/Disp] twice to set a number of sequences. The number depends on the bar in
which you press [Tap/Disp] . Press again [Auto/Del] to exit the automatic playback mode.
1. Press [Music/Bkc]. The indicator for automatic playback in the display lights up.
2.
Press the [CHASE] buttons (1 to 12) of the chases you want to play. The corresponding
LED lights up and playback is started. The selected chase will start synchronously with
the audio playback of the internal microphone or the connected line level input. Press
again [Music/Bkc] to exit the audio mode.