Botex DMX DC-192 User Manual page 43

Deleting all chases
8.4.4 Playing chases
Manual playback
1. Turn off the controller using the mains switch.
2. Press and hold [Program] and the scene bank AB button simultaneously while turning
the controller back on again. All LEDs flash three times when all chases have been
deleted.
1. When you turn on the controller, it starts by default in Manual / Blackout mode. All
output values are blanked out. To show the values, press [Blackout]. To determine the
respective blackout status, there is an indicator in the display that flashes when acti-
vated and shows 'OFF' when deactivated. Press [Blackout] to stop the display from
flashing.
2.
Press the [CHASE] button (1 to 12) of the scene you want to play. The corresponding LED
lights up.
3. Press the scene bank UP / DOWN buttons to move manually through the chase steps.
You can also use the fader [FADE TIME] if you want to have a cross fade between the
steps.
4.
Repeat steps 2 and 3 to manually play additional scenes.
Operating
DMX DC-192
43
DMX controller