Setup - Botex DMX DC-192 User Manual

5

Setup

Connecting the power supply
Turning the unit on
Create all connections while the device is off. Use the shortest possible high-quality cables for
all connections. Take care when running the cables to prevent tripping hazards.
Connect the included power adapter to the 9V connector of the unit and then plug the power
adapter into a wall outlet.
Turn on the device using the main switch on the rear panel. After turning the device on, the
display shows the software version and the operation mode for a short time. The related indi-
cator LEDs light up.
Setup
DMX DC-192
17
DMX controller