Botex DMX DC-192 User Manual page 39

8.4.2 Recording a scene bank on a chase
6. Keep [Program] pressed for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti-
vated.
1. Keep [Program] pressed for about two seconds or until the PROG indicator flashes on the
display. When the indicator flashes, the recording mode is active and you can release the
button.
2. To select a chase press the corresponding [CHASE] button (1 to 12). The corresponding
LED lights up.
3.
Use the scene bank UP / DOWN buttons to select a scene bank to be added to the chase.
You can see the scene bank in the display by looking at the digits on the right outer side.
4.
Simultaneously press [Music/Bkc] and [Midi/Rec] to include the entire scene bank. When
the scene bank is included, all LEDs flash three times. Scenes are included in the same
order in which they are stored in the scene bank.
5.
Repeat steps 3 and 4 to include further scene banks.
Operating
DMX DC-192
39
DMX controller