Deleting A Scene - Botex DMX DC-192 User Manual

8.3.4 Deleting a scene

1.
Keep [Program] pressed for about two seconds or until the PROG indicator flashes on the
display. When the indicator flashes, the recording mode is active and you can release the
button.
2. Use the scene bank UP / DOWN buttons to select the scene bank that contains the scene
you want to delete.
3.
Press and hold [Auto/Del] and simultaneously press the [SCENE] button (1 to 8) of the
scene you want to delete. All LEDs flash three times when the scene has been deleted.
4.
Repeat steps 2 and 3 to delete further scenes.
5.
Keep [Program] pressed for about two seconds or until the PROG indicator stops flashing
on the display. As soon as the blackout indicator flashes, the programme mode is deacti-
vated.
Operating
DMX DC-192
35
DMX controller