Specify A Custom Ntp Server - NETGEAR WAC505 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic.
The General page displays the basic system settings.
5. Enter a new name in the System Name field.
Using the following guidelines:
• The name must contain alphanumeric characters, can contain hyphens, and cannot be longer than
15 characters.
• The name cannot start or end with a hyphen.
• The name must contain at least one alphabetical character.
6. Click the Apply button.
Your settings are saved.

Specify a Custom NTP Server

By default, the access point receives its time from a default NETGEAR Network Time Protocol (NTP) server,
but you can also specify a custom NTP server.
To specify a custom NTP server:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic > Time.
Manage and Maintain the Access Point
95