Manage The Leds - NETGEAR WAC505 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual
By default, SNMP is disabled.
6. Specify the following settings:
• Read-Only Community Name. The community string that allows the SNMP manager to read the
access point's MIB objects. The default is public.
• Read-Write Community Name. The community string that allows the SNMP manager to read and
write the access point's MIB objects. The default is private.
• Trap Community Name. The community name that is associated with the IP address at which
traps must be received. The default is trap.
• IP address (to receive traps). The IP address of the SNMP manager that must receive the traps.
• Trap Port. The port number at which the SNMP manager must receive traps. The default is 162.
7. Click the Apply button.
Your settings are saved.

Manage the LEDs

By default, all LEDs are enabled and function as described in
manage whether the LEDs light at all. This function is useful if the access point must function in a dark
environment.
To enable or disable the LEDs:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
Manage and Maintain the Access Point
108
Top Panel With LEDs on page 8. You can