Specify A Custom Ntp Server - NETGEAR WAC510 User Manual

The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic.
The General page displays the basic system settings.
5. Select a country or region from the Country / Region menu.
6. Click the Apply button.
Your settings are saved. The access point restarts with the default WiFi settings that are specific to the
selected country or region.

Specify a Custom NTP Server

By default, the access point receives its time from a default NETGEAR Network Time Protocol (NTP) server,
but you can also specify a custom NTP server.
To specify a custom NTP server:
1. Open a web browser from a computer that is connected to the same network as the access point or to
the access point directly through an Ethernet cable or WiFi connection.
2. Enter the IP address that is assigned to the access point.
A login window opens.
3. Enter the access point user name and password.
The default user name is admin. The default password is password. The user name and password
are case-sensitive.
The Dashboard page displays.
4. Select Management > Configuration > System > Basic > Time.
By default, the Enable radio button is selected and the access point receives its time from a default
NETGEAR NTP server.
5. Select the Use Custom NTP Server check box.
6. Take one of the following actions:
• Enter the host name of the NTP server.
AC WiFi Business Access Point WAC510
Manage and Maintain the Access Point
86