Technical Specifications - NETGEAR WAC505 User Manual

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual

Technical Specifications

The following table shows the technical specifications of the access point.
Table 3. Access point specifications
Feature
Supported WiFi radio
frequencies and WiFi modes
Maximum theoretical
throughput
Maximum number of
supported clients
WiFi standards
802.11 security
Operating frequency range
Power over Ethernet
Description
2.4 GHz band: 802.11ng, 801.11bg, and 802.11b
5 GHz band: 802.11ac, 802.11na, and 802.11a
Supports 2.4 GHz and 5 GHz concurrent operation
About 1.2 Mbps simultaneous throughput (300 Mbps on the 2.4 GHz band and 867
Mbps on the 5 GHz band)
Note: Throughput can vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead,
affect the data throughput rate.
Maximum number of 2.4 GHz WiFi clients: 50
Maximum number of 5 GHz WiFi clients: 50
IEEE 802.11ac Wave 2 standard
WiFi Multimedia Prioritization (WMM)
Wireless distribution system (WDS)
WPA2-PSK, WPA and WPA2 (mixed mode), and WPA2 Enterprise
2.4 GHz band:
• US and Canada: 2.412–2.462 GHz
• Europe: 2.412–2.472 GHz
• Australia: 2.412–2.472 GHz
• Japan: 2.412–2.472 GHz
5 GHz band:
• US and Canada: 5.18–5.24 + 5.745–5.825 GHz
• Europe: 5.18–5.24 GHz
• Australia: 5.18–5.24 + 5.745–5.825 GHz
• Japan: 5.18–5.24 GHz
IEEE 802.3af and IEEE 802.3at
Note PoE might be considered a network environment 0 per IEC
TR 62101, and thus the interconnected ITE circuits might be
considered safety extra low voltage (SELV).
Factory Default Settings and Technical Specifications
139