Polycom Real-Time Media Conferencing Platform RMX 2000 Installation & Configuration Manual page 7

13 In the Fast Configuration Wizard - System Flags dialog box, enter the
following information
Flag
Conference ID
Length (MCU)
Minimum
Conference ID
Length (User)
Maximum
Conference ID
Length (User)
MCU Display Name
Terminate
Conference when
Chairperson Exits
Auto Extend
Conferences
14 Click the Finish button.
15 In the Success Message box, click OK.
16 Log out of the RMX Web Client and log in again with the new IP
address.
Value
The number of digits of the
Conference ID that will be
assigned by the MCU.
Range: 2-16 (Default: 5)
The minimum number of digits that
the user must enter when
manually assigning a numeric ID
to a conference.
Range: 2-16 (Default: 4)
The maximum number of digits
that the user can enter when
manually assigning a Numeric ID
to a conference.
Range: 2-16 (Default: 8)
The MCU name that appears at the endpoints.
Default: Polycom RMX 2000
Yes/No (Default: Yes)
When selected (default) allows conferences running
on the RMX to be automatically extended as long as
there are participants connected.
Note: Selecting
2 digits limits
the number of
simultaneous
ongoing
conferences to
99.
7